Laptop Fan Stopped Working After Compressed Air

Laptop Fan Stopped Working After Compressed Air. Wipe the vents on the inside of the laptop with the cloth, as well as any other open area where dust has accumulated. First of all, you need to disassemble the laptop to be able to access the fan to hold it down before you blew on it, to prevent it from spinning it could damage the bearing out even circuit if it spins as for your issue, the dust is probably sticking to the fan, open it up and clean it properly hope it's not dead bearing

from venturebeat.com

(this occurs more often than you’d think.) 2. Gently blow into the fan to dislodge dust that may have fallen into the fan. Sign up now for just $199.99/year

Source: venturebeat.com

There are three possible reasons a fan would stop running. For a desktop, you need to open the computer case and remove the motherboard so as to find the.

Probably not without disassembling or replacing the fan, the connector may have been knocked loose, or worse case, you wrecked the bearings with the compressed air.

Dust can clog your laptop fan, causing it to stop working, or you can drop it accidentally, causing damage. There would be absolutely no response, no fans spinning or anything. Bare in mind i dont advise anyone to clean the fans by blowing at them neither using compressed air i recommend if possible and without voiding the warranty take it apart if theres not any seals/stickers completely disassemble it turn the fans over and clean the fans and exit airflow manually/gently with cotton buds/toothpicks and isopropyl alcohol thats the proper way to do it.

It’s the plan you need to protect the tech you love.

Gently blow into the fan to dislodge dust that may have fallen into the fan. Check the air vents on the pc for dust or debris. The biggest risk is spinning it too fast for it's bearing design which can lead to bearing failure.

If the fan still isn't working it's worth having it replaced.

Let’s start with something basic. Elevating your laptop will give it room to circulate air much. Some are obvious like debris getting sucked in it and rendering the fan inoperable:

It is possible to make a bad situation worse, of course, but doing nothing might have eventually a similar end result:

If you have the tools and equipment you can resolder it. Fans are very cheap are not at all hard to replace, but i wouldn't recommend doing it yourself if you're not technically inclined. Use a can of compressed air to remove dust or debris from the.

For a desktop, you need to open the computer case and remove the motherboard so as to find the.

Taking apart your machine is a good way to clean its internal components, if you are comfortable with it. Using short, clean bursts of the air, blowing in the direction that the fan normally turns. Blowing dust out of the vents through canned air is a good idea.